Do you need moral support ?

MIT is at your service

Education consultant
logo avatar

Mohamed Ridha FARES

Member of the Scientific Council of the Mediterranean Group
"Mohamed Ridha Farès, M. Farès holds an engineering degree in civil engineering from ENIT (1976). He was then, for 3 years, a study engineer in the studies sub-department under the Bridges and Roads Department (the current DGPC). In 1979, he was appointed regional manager and then deputy director in charge of the management and operation of the road network in the governorate of Tunis. In 1990, Mr. Fares was appointed Central Director of Studies at the General Directorate of Bridges and Roads (DGPC) at the Ministry of Equipment, Housing and Regional Planning. In August 2003, he was entrusted with the post of Chairman and CEO of Tunisie Autoroutes. From November 2009 to February 2011, he was a member of the cabinet of the Minister of Equipment, Housing and Regional Planning. He then held, from March 2011, the post of Director General of Bridges and Roads at the Ministry of Equipment Transport In the aftermath of the Tunisian revolution, Yassine Brahim was appointed Minister of Transport and Equipment2 at the in the provisional government on January 27, 20113. He resigned on June 17 to devote himself to the activities of the Afek Tounes party and left his place to. Mohamed Ridha Fares becomes in June 2011 Ministry of Transport and Equipment. From 1990. He worked as director general of bridges and roads and also as central director of studies at the DGPC ."
logo avatar

Sami Bellalah

Member of the Scientific Council of the Mediterranean Group
"Professor and Technologist in Mechanical Engineering Iset de Nabeul and Director of Studies at the Mediterranean Polytechnic, Training Process Pilot of the QSE Project Responsible of the Certification Center in CAD: Catia and SolidWorks Pilot of the PAQ2 Quality Support Project Co-Pilot of the Project PAQ1 Quality Support Coordinator of two Co-constructed Licenses in Mechanical Engineering launched as part of the PAQ 1 and 2 project at the Higher Institute of Technological Studies of Nabeul / MES of Tunis (Mechanical / Energy Engineering. Coordinator with professionals in the sector Maintenance and Automotive Diagnostics for the definition of training needs and their translation into educational and operational objectives Online Course Administrator: Hydraulic Systems and Systems Member of the AIPU2014 scientific committee - Member of the 2009 Iset de Nabeul Establishment Project -2012 in charge of: “Diagnosis of the Educational Devices of the Institution” - From 2010, Coordinator “Iset-industry” partnership projects within the framework of applied research. - From 2010, University Coach at the NET Pépinière / Volet Technique; Support young promoters including the realization of their ideas from the technical file. - Since 2009, Head of evening courses; in charge of training repository in Mechanical Engineering. - Member of the recruitment commission for vocational training inspectors 2008. - Organizer of two MDA Workshops, Iset de Nabeul. - Founding member of the Center for Research and Valuation of Competences in Innovation Management, CRMI, brings together about twenty teachers from Iset de Nabeul working on the Valuation of research and skills in innovation management. Participation in various themes related to Innovation "
logo avatar

Jean Luc Prigent

Member of the Scientific Council of the Mediterranean Group
"PhD in Mathematics (Probability Theory) on “Stochastic Calculus and Applications: Weak Convergence of Financial Markets; Structural Equations; Asymptotic behavior of Solutions of Stochastic Differential Equations”, (1992, University of Rennes 1, France)
Habilitation in Business with the topic “Financial Markets: Theory and Practice” (1999, University of Paris I, Panth´eon-Sorbonne, France). .
Habilitation in Economics with the topic: “Financial Economics: Theoretical and Empirical Issues” (2001, University of Cergy-Pontoise, France). Research Interests Portfolio optimization, performance measurement, asset pricing and hedging, risk management, decision theory. Administrative or research responsabilities."
logo avatar

Soumaya DHIB

Member of the Scientific Council of the Mediterranean Group

Director of the Mediterranean Polytechnic School Private University in Tunis Doctor in Physics, Obtaining a Doctorate Degree from where the Thesis as « Natural convection of Rayleigh Bénard type in turbulent regime by simulation of large scales ». under the supervision of Tayeb Bellili Faculty of Science Compus Manar; Responsible for the preparatory cycle within the Mediterranean Polytechnic School, as well as Head of supervision and monitoring of students at the Mediterranean Polytechnic School, she has published several scientific articles in various international journals, among which :

" Numerical prediction of critical Rayleigh number of an unsteady three-dimensional fluid flow within a parallelepiped enclosure with four heated square sections submitted to a constant temperature".

" Numerical study of natural convection in parallelepipedic cavity with various aspect ratios"

" Thermal study of the cooling of four electronic components "Soumaya DHIB ,Nader BEN CHEIKH, Brahim BEN BEYA CNRP’2011, (2011), Sousse, Tunis " Numerical simulation in a confined jet ",Soumaya DHIB ,Mouhamed KNANI, Henri BOISSON, ’2012, (2012), Izmir, Turkey .

logo avatar

Rchid AMRI

Member of the Scientific Council of the Mediterranean Group
"Expert Consultant at the Ministry of Higher Education and Scientific Research PAQ Service (Support Project for the Quality of Scientific Education) from 2013 Director of studies and internships, Deputy Director of the Higher Institute of Studies Technological of Rades ISET RADES, 2009 until 2011 Director of the Department of Mechanical Engineering at the Higher School of Technical Sciences of Tunis ESSTT."
logo avatar

Ali ZGHAL

Member of the Scientific Council of the Mediterranean Group
"Doctor of philosophy, Kobe University, Graduate School of Science and Technology, Kobe, Japon Equivalence: Doctorat d’Etat en Génie mécanique Spécialité: Génie Mécanique Master of Engineering, University of Electrocommunications, Tokyo, Japon Spécialité: Génie Mécanique - Certificat d’aptitude à la langue japonaise, Osaka University of Foreign Studies, Osaka, Japon Spécialité: Langue Japonaise - Maîtrise es Sciences et Techniques, Ecole Normale Supérieure de l’Enseignement Technique de Tunis, Tunisie Spécialité: Construction Mécanique Mention: Assez Bien -Certificat d’Aptitude à l’Enseignement Technique, Ecole Normale Supérieure de l’Enseignement Technique de Tunis, Maître de Conférences à l’Ecole Supérieure des Sciences et Techniques de Tunis"
logo avatar

Mohamed Ridha OUNI

Member of the Scientific Council of the Mediterranean Group
"Professor in Civil and Rural Constructions Civil Engineering Rural Engineering Master of Technical Sciences 32 years of experience in the field of dams and hill lakes in addition to two doctorates on dams Member of the International Association of Soil Mechanics Member of the Association Tunisian Soil Mechanics"
logo avatar

Yassine CHABEB

Expert International de France
"DIRECTEUR DE PROGRAMME R&D • PALO IT LABS • 12/2015 - Coaching/Formation R&D et innovation (montage de formation, un plan de coaching/conseil des clients, publications / présentations / articles dans des conférences / magazines / tribunes techniques et scientifiques (Conférences internationales, Magazine Programmez, Blog technique, Conférences techniques et scientifiques)INGENIEUR R&D IT • CARREFOUR (PALO IT) / ENEDIS / EUTELSAT / INSTITUT MINES-TELECOM • 9/2007 – 12/2015 - Secteur de la Grande distribution et la Télécommunication satellitaire : Java EE, Web sémantique, Services Web, Java EE, (My)SQL, Panda, Tomcat, Maven, Redmine, IBM Telelogic Rational Synergy, IBM Telelogic Rational Change (collaboration et versioning) Eclipse, JBoss, Axis2, Spring, Ant, Apache Jmeter, Crontab, GWT, Lotus Notes, xWiki, LaTeX, PetalsMaster, UDDI. Direction du pôle R&D&Innov, d’un cabinet de conseil international Enseignement et formation en entreprises privées d’informatique et d’enseignement supérieur. - Prototypage technique et développement de POC (Proof Of Concept) - UI et UX Design : Formation certifiée par Le Laptop + maîtrise de l’éditeur graphique SKETCH (MAC OS) + outil de prototypage Design : INVISION - Data Science : Python + Anaconda + Jupyter +Notebook - Java EE et IoT (Internet of Things / Objets connectés) - Web sémantique, Services Web. - Versionning : SVN, Git, GitHub, GitLab - Processus, outils et management R&D et innovation pour les entreprises industrielles ou laboratoire de recherche / d’innovation (Coaching / Conseil / Formation)."
  • Address
  • 2. Beb El Khadra Street, 1006 Tunis
  • Phone
  • (+216) 71 283 417
    (+216) 71 283 416
  • E-Mail
  • contact@mit-polytech.tn